Rane MLM82S - Features and Specifications

MLM82 S
MIC & LINE MIXER
Data Sheet-2
Features and Specifications
Parameter Specication Limit Units Conditions/Comments
Inputs: Ty pe Active Balanced
..........Mic Connectors XLR pin 2 = (+)
..........Stereo Line Connectors ¼" TRS tip=(+), ring=(–), sleeve=GND
Mic / Line Input Impedance 1k / 96k 1%  Balanced 500+500 / 48k + 48k
..........Mic Gain Range o to +60 ±1.5 dB
..........Line Gain Range o to +20 ±1.5 dB
..........Equivalent Input Noise -128 typ dBu 20 kHz bandwidth, 150  termination
..........THD & Noise 0.02 max % Gain=40 dB, +4 dBu @ 1 kHz, 80 Hz BW
..........Frequency Response 30 Hz - 35 kHz -3 dB
..........Maximum Input 11.9 typ dBu Minimum Gain (3 Vrms)
.....@ Mic Level 38.6 typ dBu Maximum Gain (9.1 mVrms)
Stereo Line Input Impedance 20k min 
..........Gain Range o to +12 ±1 dB
..........Signal-To-Noise Ratio 90 typ dB Unity gain, output @ +4 dBu, 22 kHz BW
..........Frequency Response 10 Hz - 35 kHz -3 dB
..........THD & Noise 0.007 max % +4 dBu at 1 kHz, 80 kHz BW
Outputs: Type Active Balanced
..........Connectors XLR
..........Impedance 200/100 1%  Line level Out/Mic level Out
..........Gain Range O to +6 ±2 dB
..........Drive Level +24 dBu 600  load balanced
Phantom Power +15 4% VDC
Output Cable Length 150 0 typ feet Line-level, <50 pF per foot
Crosstalk -75 @ 1 kHz max dB re +4 dBu any channel to any channel
Power Supply Requirement 100 to 240 10% VAC 50/60 Hz, 7W
Unit: Conformity CE, FCC, UL
Unit: Construction All Steel
..........Size 1.75"H x 19"W x 5.3"D (1U) (4.4 cm x 48.3 cm x 13.3 cm)
..........Weight 4 lb (3 kg)
Shipping: Size 4.25" x 20.3" x 13.75" (11 cm x 52 cm x 35 cm)
..........Weight 8 lb (5 kg)
Note: 0 dBu=0.775 Vrms