EasyManua.ls Logo

Rane MP2015 - MP2015 Overview

Rane MP2015
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
MP2015 MANUAL
MP2015 Overview
Highest quality user control surface
Excellent control ergonomics with intuitive and comfortable layout.
Potentiometers with exceptional feel and 1 million cycle life.
Studio console grade backlit push switches.
Digital Signal Processing
A/D and D/A dynamic range 116 dB A-weighted, THD+N 0.0009%.
All audio processing is 32-bit oating point with supported sample rates: 44.1 kHz, 48 kHz or 96 kHz.
S/PDIF inputs for each Deck and Session input.
Dynamic range 128 dB with ultra-low jitter and 16:1 SRC conversion range.
S/PDIF Session output to record mix or chain mixers together without analog conversion.
2 USB ports allow simultaneous connection of 2 computers
Each USB port supports 10 playback and 14 record channels.
Simultaneously record 4 Decks, Submix, Session In and Main mix.
USB 2.0 high-speed class compliant MIDI and Audio
Driver installation is not required for Mac OSX.
High-performance universal ASIO driver is provided for Windows.
User control panel supports user options and status.
Analog I/O designed with attention to detail
Accurate, low noise RIAA stages with 3rd-order Infrasonic (rumble) and 2nd order low-pass lters.
Transient voltage and EMI protection, turn on muting and overload protection.
8 Vrms balanced outputs, 4 Vrms unbalanced I/O.
Four Deck inputs feature the following:
USB A, PH/CD, AUX or USB B input selection with Gain trim and RIAA sensitivity.
Deck 1 USB playback channels 1-2
Deck 2 USB playback channels 3-4
Deck 3 USB playback channels 5-6
Deck 4 USB playback channels 7-8
3-band full-cut EQ with 2 selectable crossover points: Linkwitz-Riley 2nd-order (LR-2)
4th-Order Selectable Low-pass, Low/High-pass, or High-pass lter
Filter Mode, Resonance and on/off controls.
Main Mix Level control, Headphone Cue, Submix assign, 16 segment Q-peak meter with Peak-hold.
Session Input with Level control
Source may be unbalanced RCA, S/PDIF or USB AUX.
USB AUX playback channels 9-10.
Assigned to Main Mix or Submix, where the submix can act as a fth input channel.
Microphone input with 48 volt phantom power and Line-level switches
Combo XLR and 1/4" TRS input jack.
May be used with a condenser mic, dynamic mic or line-level (wireless) input.
Input Level control, 1-knob tone control, on/off and Duck controls.
Unique Submix feature
Allows grouping any number of inputs for easy and intuitive multi-source mixing.
Channels assigned to the Submix share a common set of controls, similar to the Deck inputs.
Assignable external Effects Loop with sensitivity, in/out and wet/dry control.
High performance Integrated Isolator EQ
4th-order 3-band Isolator with fully adjustable crossover points.
Exceptionally smooth and exible, tailor to your music.
Linkwitz-Riley 4th-order isolator EQ (LR-4).
Main Mix with 16-segment stereo Meter
Balanced XLR Main Output with Level control
Balanced 1/4" TRS Booth Output with Level control
Session Output with Level control
S/PDIF output for digital recording or chaining mixers together.
Unbalanced RCA analog output.
Effects Loop may be assigned to the Main Mix.

Related product manuals