R76 Series of Tire Changers 33 P/N 5900346 — Rev. C — Dec. 2019
Turbo-Blast™ Bead Sealing System
The Turbo-Blast Bead Sealing System, located on the back of the Tire Changer, provides a very strong
blast of pressurized air that is useful for sealing a stubborn bead.
The system includes:
• Pressurized Air Tank. Holds the pressurized air, enough for multiple blasts of pressurized air.
• Intake Lever. When open, air from the incoming air source goes into the Pressurized Air Tank.
When closed, no air can get into the tank.
• Pressure Relief Valve. Releases air pressure from the tank if the pressure gets too high.
• Hose. Moves the pressurized air from the tank to the Nozzle.
• Nozzle. Where the pressurized air comes out.
⚠ DANGER Use extreme care with the TurboBlast Bead Sealing System. You could cause
product damage, personal injury, or death. Never point the Nozzle at a person or
thing. Do not use the TurboBlast System for anything except sealing a bead.
• Handle. Gives you an easy way to position the Nozzle.
Use both hands
.
• Button. Press to release a powerful blast of air.
Not necessarily to scale.
To Next Page
Loading...
