Ransomes 728D 946703 User Manual

General safety warning advising to read the manual before operating, setting up, or servicing the machine.

Defines signal words (DANGER, WARNING, CAUTION) indicating hazard seriousness for operator safety.

Warning against unauthorized modifications to the machine and their potential safety risks and warranty implications.

Illustrates labels for speed, parking brake, and air intake maintenance notices.

Displays labels related to fuel type, filling instructions, and hydraulic fluid.

Warning labels concerning battery safety and hazards from rotating fan and other parts.

Label indicating the operator's manual and the correct tire inflation pressure.

Warnings on passengers, guards, interlocks, operator training, slopes, and general safety compliance.

Specific warnings about debris, blade rotation, blade height, and damage inspection after impact.

Labels warning about restrained forces during deck servicing and the use of the deck latch.

Warnings about high-pressure fluid hazards, rotating parts, blade installation, and thrown objects.

Covers safe operating practices, children's safety, and proper fuel handling and storage.

Guidance on preparing the machine, safety checks, and procedures for leaving the operator's position.

Instructions for safe operation on slopes and procedures for clearing plugged cutter decks.

Procedures for jump starting the engine and guidelines for machine maintenance and storage.

Steps for attaching the steering wheel and tractor wheels, including torque specifications.

Instructions for seat attachment and pre-operation checks like fluid levels and tire pressure.

Steps for assembling caster wheels and preparing the tractor for deck attachment, including hose connections.

Instructions for connecting deck hoses, push arms, and setting height adjustment pins.

Procedures for securing hydraulic hoses, attaching safety chains, and verifying hose routing.

Guide to installing weight transfer springs and lubricating deck push arm fittings.

Explains ignition switch, PTO switch, and operation of oil and alternator warning lights.

Details on fuel gauge, temperature gauge, horn button, and fuse location.

Instructions on using the FWD/RVS pedal for movement and operating the parking brake systems.

Describes operation of the lift lever, throttle lever, and the seat switch interlock.

Guides for starting, stopping the engine, engaging PTO, and operating the machine for cutting grass.

Advice on traversing curbs and procedures for pushing the tractor with the engine stopped.

Instructions for adjusting seat suspension and calibrating the standard parking brake cable.

Brief mention of the adjustment procedure for optional steering brakes.

Procedures for adjusting alternator belt tension and rear wheel toe-in.

Steps for adjusting the steering shaft for proper alignment.

Detailed steps for adjusting the FWD/REV footpedal linkage to the hydrostat for correct operation.

Information on the hydraulic deck valve, pressure measurement, and relief pressure.

Table listing daily and hourly service checks for the machine's components and systems.

Details on required engine oil, hydraulic oil, and radiator coolant quantities and types.

Guidelines for cleaning the machine, checking hydraulic fluid levels, and performing battery maintenance.

Steps for changing engine oil and oil filter, and maintaining the air cleaner element.

Procedure for removing water from the fuel separator and bleeding air from the fuel system.

Guidance on replacing fuel filters and maintaining the coolant level.

Important notes for servicing hydraulic systems, including pressure relief and leak checking.

Instructions for adjusting caster mounting and spacers to set the cutting height.

Guide to adjusting hanger brackets for pitch and referring to the Height of Cut chart for settings.

Procedures for verifying and adjusting cutter deck belt tension and using the deck latch.

Detailed instructions for removing, installing, and sharpening mower blades, including balance checks.

Details on RANSOMES P/N, drive type, engine, performance, fuel, steering, and seat for the tractor.

Specifications for different cutter deck models, including width, blades, construction, and cutting rate.

Tables providing recommended torque values for American National Standard and Metric fasteners.

Presents the wiring schematic for the tractor and a wire color code for identification.

Diagram illustrating the hydraulic system for 4-wheel drive models, showing components and flow.

Diagram illustrating the hydraulic system for 2-wheel drive models, showing components and flow.

Details the warranty period, coverage for defective parts, and return procedures for service.

Lists items not covered by warranty and outlines owner's obligations for maintenance and care.