Ransomes Matador 71 - User Manual

Safety and Operation / Maintenance and Parts Manual
Matador 71
RJ 100 / 102003
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
24453G-GB (rev.4)
Series:BN, EH & CF - Engine type: Honda GX160 K1-Q4
Product codes: LDDD081, LDDD181, LBDD700 & LDDD700
YEARS OF MOWING
EXCELLENCE

Summary

Introduction

Safety Instructions

3.7 SLOPES

Exercise caution on slopes, avoid sliding conditions, and do not use on slopes > 15°.

Specifications

Decals

5.1 SAFETY DECALS

Controls

6.1 A OPERATOR PRESENCE CONTROL - MECHANICAL (OPC)

Explains the function of the operator presence control lever.

6.5 IGNITION CUT-OUT SWITCH

Operation

7.1 DAILY INSPECTION

Outlines daily checks before operating the machine.

7.2 OPERATOR PRESENCE AND SAFETY INTERLOCK SYSTEM

Explains the operator presence system and testing procedures.

7.3 OPERATING PROCEDURE

General operating guidelines and safety precautions.

Adjustments

8.1 HEIGHT OF CUT ADJUSTMENT

How to adjust the cutting height using the front rolls.

8.3 CYLINDER TO BOTTOM BLADE ADJUSTMENT

Adjusting the cylinder to the bottom blade for correct cutting.

8.9 BACK LAPPING THE CUTTING CYLINDER

8.11 MAIN CLUTCH ADJUSTMENT

Maintenance

Maintenance Schedule

Table outlining operator and workshop maintenance checks by hours/time.

10.1 ENGINE Daily (Every 8 working hours)

10.2 Engine Weekly: (Every 50 working hours)

Lubrication

11.1 Engine Daily: (Every 8 working hours)

11.4 MACHINE

Guarantee; Sales & Service

Ransomes Matador 71 Specifications

General

Brand	Ransomes
Model	Matador 71
Category	Lawn Mower
Language	English