To Next PageTo Next Page
Need help?Do you have a question about the Ransomes Matador and is the answer not in the manual?
Key operational and safety advice for the mower.
Details on machine and engine serial number plates.
Procedures for disposing of scrap products during and at end of service life.
Information on obtaining parts manuals and recording key numbers.
Instructions for assembling the mower after unpacking.
General safety principles for operating the mower.
Detailed instructions for safe operation, including slopes and hazards.
Safety regarding ROPS, fuel handling, and maintenance/storage.
Key safety alerts, interlock system, and general warnings.
Details of the Honda GX160-K1 engine.
Physical measurements and weight of the machine.
Construction, transmission, clutches, rolls, and other machine components.
Information on hand/arm and whole body vibration exposure limits.
Sound pressure/power levels and maximum safe slope gradient.
Details on cutting unit construction, performance, and lubricants.
Specifications for recommended grease and engine oil.
Declarations and standards the machine complies with.
Statement regarding the machine as a partly completed machine.
Identification and meaning of various safety warning labels.
Identification and meaning of operational instruction labels.
Description of the OPC control for engaging drive.
Function and operation of the landroll clutch lever.
How to adjust engine speed using the throttle lever.
Operation of the lever for the landroll brake.
How to engage and disengage the cutting cylinder.
Location and function of the engine start/stop switch.
Checks to perform before each day's use.
Testing the interlock system for safe operation.
General steps and precautions for operating the mower.
Procedures for starting and stopping the engine.
Tips for maintaining the machine and good cutting results.
How to set and adjust the cutting height using front rolls.
Procedure for aligning the front rolls with the bottom blade.
Setting the gap between the cutting cylinder and bottom blade.
Adjusting the cylinder clutch for proper engagement.
Adjusting the landroll clutch and concave for grass collection.
Adjusting the landroll scraper and chain tension.
Methods for back lapping, and adjusting handle and parking brake.
Information and installation of the optional trailing seat.
Schedule for routine maintenance and lubrication tasks.
Daily cleaning and operational checks for the engine.
Weekly maintenance for the engine's air cleaner.
Maintenance for the clutch and landroll brake.
Procedures for engine oil checks and changes.
Lubrication points for cutting cylinder, landroll, and front roll.
Identifying and resolving washboarding patterns in the cut.
Identifying and resolving marcelling patterns in the cut.
Identifying and resolving step cutting issues.
Identifying and resolving scalping issues.
Identifying and resolving straggler issues in the cut.
Identifying and resolving streaks in the cut.
Identifying and resolving windrowing of grass clippings.
Identifying and resolving rifling or tramlining patterns.
Addressing issues caused by mismatched cutting unit adjustments.
Information on warranty terms and service contacts.
General| Brand | Ransomes |
|---|---|
| Model | Matador |
| Category | Lawn Mower |
| Language | English |
