Ransomes Super Certes 51 User Manual

Safety, Operation and Maintenance Manual
Handbok för säkerhet, drift och underhåll
Super Certes 51 & 61, Super Bowl 51 &
Marquis 51 & 61
RJ 100 /05 2006
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.
24791G-SE (rev.0)
Super Certes 51: Series: EC2 Product codes: LDFC510 Engine type: Honda GX120-Q4
Super Certes 61: Series: ED2 Product codes: LDFC610 Engine type: Honda GX120-Q4
Super Bowl 51: Series: EE2 Product codes: LDFD510 Engine type: Honda GX120-Q4
Marquis 51: Series: EF2 Product codes: LDAA510 Engine type: Honda GX120-Q4
Marquis 61: Series: EG2 Product codes: LDCB610 Engine type: Honda GX120-Q4
Super Certes 51: Serie: EC2 Produktkod: LDFC510 Motor: Honda GX120-Q4
Super Certes 61: Serie: ED2 Produktkod: LDFC610 Motor: Honda GX120-Q4
Super Bowl 51: Serie: EE2 Produktkod: LDFD510 Motor: Honda GX120-Q4
Marquis 51: Serie: EF2 Produktkod: LDAA510 Motor: Honda GX120-Q4
Marquis 61: Serie: EG2 Produktkod: LDCB610 Motor: Honda GX120-Q4
GB
English
VARNING: Om denna maskin används på fel sätt kan den
orsaka svåra personskador. De som använder och
underhåller denna maskin ska utbildas i hur den används
korrekt, vara varnade för de förekommande riskerna och
ska alltid läsa hela handboken innan någon form av arbete
utförs på eller med maskinen.
YEARS OF MOWING
EXCELLENCE

Ransomes Super Certes 51 Specifications

General

Engine Type	Petrol
Drive System	Self-propelled
Grass Collection	Optional grass box
Cutting Width	51 cm (20 inches)
Cutting Height Adjustment	Micro-adjuster

Summary

Introduction

Product Identification

Details machine name, serial number, year, weight, and engine power.

Spares Stocking Guide

Recommended spare parts and support materials for maintenance.

Scrap Product Disposal Guidelines

Procedures for safe and environmentally sound disposal of the machine.

Safety Instructions

Operating and General Safety

Essential operating instructions, safety signs, starting, driving, and slope precautions.

Hazard Definitions and Specific Alerts

Explains DANGER, WARNING, CAUTION levels and specific safety alerts like California Proposition 65.

Specifications

Engine and Machine Specifications

Details engine type, model, power, machine construction, transmission, and clutches.

Dimensions and Lubricants

Lists machine dimensions, weight, and recommended lubricants for optimal performance.

Vibration Levels

Presents hand/arm and whole body vibration levels for different models.

Conformity Certificates

Displays EC declarations and compliance with European directives for safety and EMC.

Controls

Operator Presence and Brake Controls

Explains the Operator Presence Control (OPC), Landroll Clutch, and Brake Release Lever.

Engine and Clutch Levers

Details the Ignition Cut-out Switch and Cylinder Clutch Lever for engine and cylinder operation.

Operation

Daily Inspection and Safety System Test

Procedures for daily visual inspection and testing of operator presence and safety interlock systems.

Operating Procedures and Best Practices

Step-by-step guide for operating the machine, including safety precautions and efficiency tips.

Maintenance

Maintenance and Lubrication Schedule

Chart outlining maintenance tasks based on working hours and seasons.

Engine Daily and Weekly Checks

Instructions for checking cooling fins, air intake, and air cleaner elements.

Clutch and Layshaft Cover Maintenance

Guidance on clearing grass from the clutch and layshaft area.

Lubrication

Engine Oil Checks and Changes

Procedures for checking and changing engine oil at different intervals.

Machine Lubrication Points

Details lubrication points for cutting cylinder, roll spindle, and landroll using grease and oil.

Adjustments

Height of Cut Adjustments

Instructions for adjusting cutting height on Marquis, Super Certes, and Super Bowl models.

Cylinder and Clutch Adjustments

Procedures for adjusting the cylinder-to-bottom-blade gap and cylinder clutch.

Belt and Parking Brake Adjustments

Guides for adjusting drive belts and the parking brake for optimal performance and safety.

Accessories

Brush, Comb & Transport Wheels

Instructions for fitting brush/comb sets and transport wheels for Super Certes.

Verti-Groom Attachment Setup

Details on setting up, adjusting drive belts, and lubricating the Verti-Groom attachment.

Guarantee and Service

Warranty and Service Information

Outlines the guarantee terms and how to access sales and service support.