EasyManua.ls Logo

Ransomes 51 Super Bowl - User Manual

Ransomes 51 Super Bowl
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
RJL 100 September 2014
GB
United
Kingdom
Safety, Operation & Maintenance Manual
Ransomes - Marquis, Super Certes and Super Bowl
Engine - HONDA GX120
51 Marquis
Product Code: LDAA504
Series: EF4
61 Marquis
Product Code: LDCB604
Series: EG4
51 Super Certes
Product Code: LDFC504
Series: EC4
61 Super Certes
Product Code: LDFC604
Series: JG4
51 Super Bowl
Product Code: LDFD504
Series: JF4
WARNING
WARNING: If incorrectly used this machine can
cause severe injury. Those who use and maintain
this machine must be trained in its proper use,
warned of its dangers and must read the entire
manual before attempting to set up, operate, adjust
or service the machine.
25065G-GB (R1)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ransomes 51 Super Bowl and is the answer not in the manual?

Summary

Introduction

Product Identification

Details on identifying the machine's product code, serial number, and engine details.

Assembly

Instructions for assembling the mower from its packaging and attaching components like handles.

Safety

Safe Operation and Preparation

Guidelines for operating the mower safely, including operator responsibilities and pre-operation checks.

Safe Fuel Handling

Precautions for safely handling and refueling the machine with petrol.

Important Safety Notes and Warnings

Key safety alerts, including interlock system operation and general hazard warnings.

Specifications

Engine and Dimensions

Technical details of the engine and physical dimensions/weights for different mower models.

Machine, Vibration, and Noise Data

Machine specifications, hand/arm vibration levels, and whole body vibration levels.

Cutting Unit and Performance Specs

Specifications for cutting units, performance metrics, and recommended lubricants.

Slopes

Maximum safe operating slope angle for the mower, calculated according to BS EN ISO 5395.

Controls

Operator Presence Control (OPC)

Explanation and operation of the Operator Presence Control (OPC) on the handle bar.

Engine Ignition Switch

Location and operation of the ignition switch to start and stop the engine.

Operation

Daily Inspection

Procedures for daily inspection of the mower, including checks for leaks and component condition.

Operator Presence System Test

Explanation and testing procedure for the Operator Presence and Safety Interlock System.

Starting and Stopping the Engine

Step-by-step instructions for starting and safely stopping the mower's engine.

Adjustments

Height of Cut Adjustment

Instructions for setting the height of cut for different mower models.

Cylinder to Bottom Blade Adjustment

Procedure to adjust the cutting cylinder to the bottom blade for optimal cutting.

Backlapping

Procedure for backlapping the cutting cylinder blades and bottom blade for sharpness.

Maintenance

Maintenance and Lubrication Chart

A chart detailing maintenance intervals, items, and corresponding section numbers.

Engine Daily Checks

Daily checks and cleaning procedures for the engine and machine controls.

Engine Weekly Checks

Weekly maintenance tasks for the air cleaner elements and paper elements.

Quality of Cut Troubleshooting

Washboarding

Diagnosing and resolving washboarding, a cyclical pattern of varying cutting heights.

Marcelling

Diagnosing and resolving marcelling, a wave-like cut appearance caused by varying heights.

Scalping

Diagnosing and correcting scalping, where grass is cut too short.

Streaks

Identifying and fixing streaks, lines of uncut grass caused by bedknife issues.

Fuses and Relays

Fuse and Relay Identification

Identification of fuse and relay numbers and their corresponding functions.

Ransomes 51 Super Bowl Specifications

General IconGeneral
BrandRansomes
Model51 Super Bowl
CategoryLawn Mower
LanguageEnglish

Related product manuals