Ransomes Parkway 2250 Plus - User Manual

Safety Operation & Maintenance Manual
Handbok för säkerhet, drift och underhåll
RJL 100 January / Januari 2010
®
GB
United
Kingdom
Series: WB - Engine type: Kubota V1505
Product code: LGNN040
Serie: WB - Motortyp: Kubota V1505
Produktkod: LGNN040
Ransomes Parkway 2250 Plus Ride On Reel Mower
Ransomes Parkway 2250 Plus Åkmanövrerad cylinderklippare
24199G-SE (rev.4)
SE
Sweden
VARNING: Om denna maskin används på fel sätt kan den
orsaka svåra personskador. De som använder och
underhåller denna maskin ska utbildas i hur den används
korrekt, vara varnade för de förekommande riskerna och
ska alltid läsa hela handboken innan någon form av arbete
utförs på eller med maskinen.
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should
read the entire manual before attempting to set up, operate,
adjust or service the machine.

Summary

Safety Instructions

General Safety Precautions

Operator qualifications, safety signs, and general warnings.

Operational Safety Procedures

Starting, driving, transporting, and leaving the machine safely.

Slope and Maintenance Safety

Precautions for slopes, blockages, and maintenance tasks.

Controls

Operation

Daily Inspection and Safety Systems

Pre-operation checks and testing of safety interlocks.

Operating Procedures

General guidelines for safe operation, starting, and driving.

Mowing and Slope Operation

Procedures for mowing, stopping the engine, and operating on slopes.

Lubrication and Maintenance

Maintenance Schedule and Daily Checks

Engine and Seasonal Maintenance

Adjustments

Backlapping and Seat Adjustments

Troubleshooting

General Engine Troubleshooting

Cutting Quality Troubleshooting

Diagnosing and resolving issues affecting cut appearance.

Cutting Uniformity Issues

Troubleshooting step cutting, scalping, stragglers, streaks, and windrowing.

Fuses and Relays

Fuses and Relays Identification

Ransomes Parkway 2250 Plus Specifications

General

Cutting Width	660 mm (26 inches)
Cutting Height	20-100 mm (0.75-4 inches)
Weight	130 kg (287 lbs)
Drive Type	Hydrostatic
Engine Type	Diesel
Engine Power	18.5 kW (24.8 hp)