To Next PageTo Next Page
Need help?Do you have a question about the Ransomes 61 Super Certes and is the answer not in the manual?
Key points and general information about the manual and machine usage.
Details on identifying the machine and engine via serial and product codes.
Guidelines for safe disposal of machine parts during and at end of service life.
Information on accessing parts manuals and recording key machine numbers.
Steps and guidance for assembling the mower from its packaging.
Essential safety guidelines for operating the mower safely.
Precautions and procedures for handling and storing fuel safely.
Safety instructions for loading and securing the mower onto a trailer.
Comprehensive safety warnings, cautions, and important notes covering various hazards.
Technical details on engine type, model, power, and general machine build.
Measurements, weight data, and maximum allowable slope angles for the mower.
Data on vibration levels, sound pressure/power, and cutting performance metrics.
Details on the specifications for different cutting units used on the machines.
Guidance on the types and grades of lubricants recommended for the machine.
Documentation confirming the machine meets relevant directives and standards.
Identification and meaning of various safety-related decals on the machine.
Identification of decals providing operational instructions for controls.
Description and operation of the mechanical Operator Presence Control system.
Information on levers for landroll clutch, brake release, and parking brake.
Details on the throttle control for engine speed and cylinder clutch lever.
Location and function of the ignition switch for starting and stopping the engine.
Pre-operation checks and inspections to ensure the machine is safe and ready.
How the safety interlock system functions and how to test it.
Step-by-step guide for operating the mower, including test cuts and general usage.
Instructions for starting the engine for the first time and how to stop it.
Procedures for aligning and adjusting the front rolls on Marquis models.
Guides for setting the cutting height for 51 Marquis and Super Certes/Bowl models.
Instructions for adjusting the cylinder-to-bottom blade gap and cylinder clutch.
Adjusting the concave, landroll scraper, and landroll clutch settings.
Procedures for adjusting the drive chains on the machine.
Steps for backlapping the cutting cylinder and bottom blade for maintenance.
Adjusting the handle angle/height and the parking brake mechanism.
Information on fitting and using the brush and comb attachment.
Details on fitting and removing transport wheels for Super Certes models.
Instructions for installing and using the trailing seat accessory.
Setup, adjustments, and maintenance for the Verti-Groom attachment.
A comprehensive chart outlining maintenance intervals and tasks.
Daily and weekly checks and maintenance for the engine and related components.
Procedures for maintaining the clutch and landroll brake systems.
Steps for checking and filling engine oil at different intervals.
Identification of key lubrication points on the machine itself.
Diagnosing and correcting washboarding patterns in the cut grass.
Identifying and fixing marcelling, a cyclical cutting height variation.
Troubleshooting uneven cutting heights between reels or units.
Addressing scalping, where grass is cut too short, causing discolored patches.
Solutions for scattered blades of uncut or poorly cut grass.
Identifying and fixing streaks, lines of uncut grass caused by bedknife issues.
Correcting windrowing, where clippings are deposited in lines.
Addressing patterns caused by roller contact or uneven cutting unit adjustments.
A list identifying the function of each fuse and relay in the machine's electrical system.
Details regarding the product warranty, terms, and how to obtain service.
General| Cutting Width | 61 cm |
|---|---|
| Cutting Units | 3 |
| Cylinders | 1 |
| Engine Type | Petrol |
| Grass Collection | Optional |
