To Next PageTo Next Page
Need help?Do you have a question about the Ransomes Super Certes 61 and is the answer not in the manual?
General| Cutting Width | 61 cm |
|---|---|
| Blades | 10 |
| Cylinder Diameter | 178 mm |
| Engine Type | Petrol |
| Grass Collection | Yes |
Explains the importance of the manual and proper machine use.
Ensures operators read manual, understand controls and safety procedures.
Importance of keeping safety labels legible and replacing missing/illegible ones.
Pre-start checks including brakes, guards, bystanders, and ventilation.
General safety for adjustments, lubrication, and maintenance, including fire hazards and refuelling.
Explains DANGER, WARNING, CAUTION levels and provides specific warnings on chemicals and hearing protection.
Lists various safety decals with their corresponding part numbers and visual representations.
Explains the function of the operator presence control and its effect on drive and cylinder rotation.
Lists essential checks to perform daily before operation, emphasizing safety precautions.
Details the operator presence system, safety interlocks, and provides tests to verify functionality.
Step-by-step procedure for safe operation, including precautions for terrain, bystanders, and debris.
Procedures for starting, stopping, and operating the machine efficiently, including cleaning and maintenance tips.
A comprehensive chart outlining maintenance tasks and their frequency based on hours or season.
Daily engine checks, focusing on cooling fins and air intake for optimal function.
Weekly air cleaner maintenance, including cleaning foam and paper elements.
Daily engine oil level check and topping up, ensuring the machine is on level ground.
Detailed steps for setting cutting height on 51cm Marquis machines using adjustment screws and pins.
Instructions for adjusting cutting height on 61cm Marquis models using a hand wheel.
Method for checking and adjusting cylinder to bottom blade clearance using paper and screws.
Procedure for adjusting the main drive clutch using a feeler gauge and checking the system.
