Ransomes Highway 3 - Starter Key Switch Operation; Throttle Control Lever Usage; Parking Brakes Functionality

en-26
6CONTROLS
6.2A STARTER KEY SWITCH __________________________________________
The starter key (A) should be turned clockwise to the
'start' position to start the engine. After starting, the key
should be released and allowed to return automatically
to the 'on' position for normal running.
NOTE:The glow plugs will auto pre-heat depending on
the coolant temperature before cranking begins.
The visual display shows the glow plug symbol and
counts down to indicate auto pre-heat is operating.
6.2B THROTTLE CONTROL LEVER _____________________________________
The lever should be moved away from the operator to
increase the engine speed and towards the operator to
decrease the engine speed.
NOTE: Engine should be used at full speed
6.2C PARKING BRAKES_______________________________________________
When the engine is running the Parking brake is
applied by depressing the switch for 2 seconds
When the engine is switched off or the operator leaves
the seat for 5 seconds the parking brake is
automatically applied.
To release the parking brake depress the rocker switch.
When the Parking Brake is on the parking symbol is
shown on the visual display.
DO NOT apply the brake when the machine is moving.