Need help?Do you have a question about the RAPA E and is the answer not in the manual?
General| Brand | RAPA |
|---|---|
| Model | E |
| Category | Refrigerator |
| Language | English |
Lists actions explicitly prohibited during operation and maintenance.
Highlights risks of electric shock and improper connection.
Advises on cleaning, condensation, and handling glass panes.
Explains the structure and components of the device code.
Details important data found on the device's rating label.
Specifies data required when contacting service.
Explains the meaning and conditions of climatic classes.
Lists key electrical and operational parameters of the device.
Provides a table detailing model sizes, storage capacities, and power.
Specifies maximum weight limits for product placement.
Outlines safe and correct procedures for connecting the device to mains power.
Explains the electrical schematic and identifies its components.
Illustrates the rear perspective of the device, highlighting key features.
Shows the side profile of the device, including depth dimensions.
Demonstrates optimal product placement within the refrigerated counter.
Illustrates product arrangement along length and within storage.
Guides on safely opening front glass panes on L-E and L-F models.
Specifies ideal environmental conditions and location for the device.
Details the steps for turning on and initial operation of the device.
Provides maximum load limits for shelves and tops of different counter models.
Instructions for replacing lamps and using partitions in series lines.
Covers general cleaning, condenser care, and condensate system.
Details secure transport, lifting, and moving guidance.
Lists essential items provided with the device for operation.
Explains the meaning of various symbols shown on the controller display.
Describes the actions performed by pressing controller switches.
Explains UP/ON OFF, SET/MUTE, and DOWN/DEFROST button functions.
Step-by-step guide to modify the desired temperature set point.
Instructions on how to activate a manual defrost cycle.
Steps to check the defrost probe temperature and access related parameters.
Lists available parameters with their units, settings, and min/max values.
Explains meanings of flashing and steady LED indicators.
Describes controller status like OFF, E0 (control probe error), E1 (evaporator probe error).
Explains specific error codes related to defrost, reset, and data errors.
Details alarms for low (LO) and high (HI) temperature conditions.
Covers condenser contamination, warm products, ambient temp, distribution, heat sources.
Advises against self-repair, notes refrigerant, and manufacturer liability.
To Next Page