Charging the devices
8
Charging the Monitor
The battery can be charged by connecting the included Micro-USB cable into the
port on the rear monitor panel.
The rear LED will show AMBER indicating the monitor is charging.
The rear LED will switch off indicating the device has been sufficiently charged.
The LED indication will FLASH RED indicating the battery charge is getting low and the
battery should be charged.
Charging the RCE
NOTE: The monitor and RCE must be charged separately to ensure a complete charge for each device.
The battery can be charged by connecting the included USB-C cable
to the USB-C charging port. (located on the side of the power button)
The power LED will show AMBER indicating the RCE is charging.
The power LED will switch off indicating the device has been sufficiently charged.
The LED indication will FLASH RED indicating the battery charge is getting low and
the battery should be charged.
To Next Page
Loading...
Need help?
General