1
EN: User Manual for RASCAL Bicycles
Thank you for purchasing a RASCAL bicycle. We hope your child will have fun riding it.
Before the First Ride
When you get your bike in a store, it is fully assembled and ready to be ridden. However, before
the first ride, make sure that:
▼ the saddle, handlebars and pedals are securely tightened,
▼ the height of the saddle and handlebars are set to suit your child's proportions,
▼ the brakes function properly,
▼ the brake levers are easy to reach (if not, adjust them),
▼ the wheels are securely seated in the frame and fork, and spin freely.
▼ the tyres are inflated (see the sidewall for recommended air pressure).
If you had your bicycle delivered, it comes pre-assembled and adjusted. Before the first ride you
need to:
▼ remove all the packaging material from the bike,
▼ mount the front wheel into the fork and tighten the axle bolts,
▼ make sure the cable of the front V-brake is connected,
▼ make sure that the tyres are inflated (see the sidewall for recommended air pressure),
▼ make sure the height of the saddle and handlebars are set to suit your child's
proportions,
▼ mount the left and right pedal as labeled, and tighten them securely.
FOR MORE DETAILED INSTRUCTIONS, SEE THE ASSEMBLY MANUAL.
Intended Use of RASCAL Bicycles
RASCAL bicycles (except for RASCAL Wild and RASCAL Rebel) are not intended for jumping,
stunts, technically demanding downhill rides or any extreme use. RASCAL bikes are primarily
designed for casual rides on paved surfaces in safe environments or in gentle terrain.
Do not exceed the maximum load of your RASCAL bike.
Improper use of RASCAL bicycles which contradicts the intended use may result in a
loss of warranty rights.
Maximum RASCAL Bike Load
RASCAL 14, RASCAL 16: 35kg
RASCAL 20: 40kg
RASCAL 24, RASCAL 26: 70kg
RASCAL Wild 24, RASCAL Wild 26: 90kg
RASCAL Wild 27, RASCAL Wild 29, RASCAL Rebel 27, RASCAL Rebel 29: 120kg
All the RASCAL bicycle models meet the standards of ISO8098 and ISO4210.
To Next Page
Loading...