Rascal 14 - Riding in Reduced Visibility; Warranty Limitations

7
To keep the bicycle in good condition it requires regular maintenance and service. The
frequency of service and maintenance should match the frequency of use. However, the
following bicycle parts should be checked regularly.
▼ Frame & Fork: Check for damage, discoloration, dents or cracks before every ride.
▼ Tires: Check the pressure, tread, and sidewalls for damage before every ride.
▼ Brakes: Check the brakes function well and are reliable before every ride. Hydraulic
brakes should be bled annually.
▼ Bolts & hardware: Check the bolts are tight weekly. Spray such parts with water
dispersant after washing/rain.
▼ Brake pads: Check the wear of brake pads weekly.
▼ Suspension fork: Recommended service interval is 6 months. See the manufacturer
guide for more details.
▼ Bottom brackets: Check for damage monthly. Keep the drive train lubricated weekly.
Check for wear and replace the worn parts immediately.
▼ Wheels: Check the spoke tension weekly. Check that the hubs spin freely.
Torque Wrench Recommendation
▼ Stem: 4-5Nm
▼ Handlebars: 4,4-5,4Nm
▼ Break levers: 6-7,8Nm
▼ Seat clamp: 6,7-7,8Nm
▼ Pedals: 35-40Nm
▼ Bottom bracket: 49-69Nm
▼ Front wheel bolts: 9-12Nm
▼ Rear wheel bolts: 9-12Nm
▼ Brake cable pinch bolt: 3-4Nm
▼ Rear derailleur cable pinch: 3-4Nm
▼ Kickstand bolts: max. 2Nm
Riding in Reduced Visibility:
Your RASCAL bicycle comes with a set of reflectors. Keep the reflectors on the bicycle and make
sure they are clean. They are crucial for good visibility and overall safety. If you ride in dull or
dark conditions, we strongly recommend using a set of reliable battery-powered lights. We also
strongly recommend your child wear reflective clothes or accessories when riding, especially in
poor visibility conditions.
Warranty Limitations
The warranty does not cover:
▼ Normal wear and tear of components.
▼ Damage and losses caused by crashes or improper use (any use deemed by RASCAL
Bikes to contradict intended use).
▼ Damage and losses caused by failure to follow the instructions and guidance in this
User Manual or the Assembly Manual.
▼ Damage and losses caused by a lack of or improper maintenance and service.