Cleaning
69 / 85
If there is a power failure during cleaning, the following warning appears:
The cleaning program must be cancelled in these circumstances.
This is achieved by pressing the Prog/Start button. The device must then be
rinsed manually!
Warning!
Aggressive chemical fluid – risk of chemical burns.
It is essential that you use:
protective clothing, safety goggles, gloves and facemask.
Rinse the spray gun nozzle and nozzle extension with clean water after every use.
Rinse the cleaning bottle with warm water after use.
Cancel the cleaning process by switching the unit off.
Always open the cooking cabinet door very slowly (hot vapours) – risk of burns.
Then rinse the unit out thoroughly, including behind the air baffle. Remove all chemical
residue before you continue with cooking.
- Cleaning the cooking cabinet seal every day will extend its service life.
- Do not use any scouring agents to clean the cooking cabinet seal.
- Clean the glass windows inside and out and the outer panels of the unit, ideally using a soft,
damp cloth. Do not use a scouring product.
- If there is heavy soiling, allow the residues soften for 10 minutes in “steam” mode before
cleaning.
- A couple of drops of salad oil will clear any stiffness in the pump plunger (manual spray gun).
To Next Page
Loading...
Need help?
General
