Network settings
89 / 107
step info/button instructions
7
Confirm the number with the "core temperature"
button.
8
Now turn the temperature selector slightly to
the right until "IP 2" appears on the temperature
display. Now you can enter the second position
of the IP address. E.g. 10.10.x.x
9
Next the subnet mask must be entered.
Proceed in the same manner as when entering
the IP address.
10
Finally, enter the gateway address. Proceed
in the same manner as when entering the IP
address and subnet mask.
11
Return to the top menu by pressing the "Prog/
Clean | Start" button. The network settings have
been saved.