Handlebar
Front Wheel
1. Use the Allen wrench to unscrew
the four screws on the face plate.
2. Center the handlebar and tighten
the four handlebar stem faceplate
bolts evenly and part way.
3. Adjust the handlebar to a position
perpendicular to the front wheel and
tighten the screws on the stem.
Carefully lift the front of the bike and
lower the fork onto the wheel so that
the brake rotor enters the caliper,
between the brake pads, and the
axle enters the fork dropouts fully.
*Remove fork protective cover and
take out plastic insert from front
wheel brake caliper.
To Next Page
Loading...
