28
© 2003 directed electronics, inc.
To determine what bypass module your vehicle requires, check
your web vehicle information sheet.
step 10
Mounting the receiver/antenna
The best location for the receiver/antenna is centered high on
either the front or rear windshield. For optimal range, the
antenna should be mounted vertically. It can be mounted hori-
zontally in relation to the windshield or under the dashboard
away from metal, but range will be diminished. Metallic window
tint can also affect range, so this should be a consideration when
determining the mounting location.
After determining the best mounting location, follow these
steps:
1. Clean the mounting area with a quality glass cleaner or
alcohol to remove any dirt or residue.
2. Plug the receiver/antenna cable into the receiver/antenna.
3. Mount the receiver/antenna using the supplied double-
sided tape.
4. Route the receiver/antenna cable to the control module and
plug it into the four-pin antenna connector.
important! To achieve the best possible range, DO NOT
leave the antenna cable bundled under the dash. Always
extend the cable its full length during installation, regard-
less of the antenna mounting location.
➜
To Next Page
Loading...