Rattler 369D - Introduction and System Overview; what is included; installation tools and safety

3
© 2003 directed electronics, inc.
wwhhaatt iiss iinncclluuddeedd
➤ Control Module
➤ One 3-Button Transmitter
➤ 9-Pin Main H/1 Harness
➤ 5-Pin H/2 Secondary Harness
➤ 4-Pin External Relay
➤ HF+ External Receiver and Cable
➤ Shutdown Toggle Switch
➤ Dual-Relay Door Lock Module
➤ Plug-in Valet/Program Button
iinnssttaallllaattiioonn ttoooollss
➤ Digital Multi-Meter
➤ Drill
➤
9
/32
and
5
/16
Drill Bits
➤ Screwdrivers
(Phillips and Flathead)
➤ Wire Stripper
➤ Solder Iron
➤ Electrical Tape
➤ Pliers
➤ Crimping Tool
note: The installation tools required will vary depending
on your vehicle.