To Next PageTo Next Page
Need help?Do you have a question about the rav G2.124R and is the answer not in the manual?
Welcomes user, praises reliability and ease of use.
Emphasizes need for trained and authorized personnel for machine operation.
Discusses residual risks identified according to EN ISO 12100 standard.
Details requirements for installation space, floor surface, and area safety.
States machine does not require internal lighting but needs an adequately lit environment.
Explains how to fix the machine to the ground using anchor small blocks.
Lists the fixtures included in the packing box for the machine.
Details the various steps for assembling machine components.
Emphasizes pre-operation checks and proper connection of the machine.
Details how to fit the wheel onto the mandrel for the G2.124R model.
Explains the procedure for fitting the wheel onto the mandrel for the GP2.124R model.
Instructions for adjusting the display's brightness and contrast settings.
Covers methods for determining wheel dimensions.
Explains how to select and manage different user profiles for machine operation.
Details procedures for measuring wheel unbalance.
Describes using auxiliary programs for unbalance measurement.
Describes how to recalculate measurements without a new spin using stored data.
Details the ECO-WEIGHT procedure for optimizing weight usage and reducing unbalance.
Explains how to change units for weight, width, and diameter measurements.
Guides on enabling/disabling previews for static unbalance and ECO-WEIGHT results.
Details how to enable/disable automatic rim width measurement devices.
Describes setting the lower limit for displayed correction weights.
Guides on setting adhesive weight thickness, length, and static threshold percentage.
Details the procedure for calibrating the machine's weight measurement sensors.
Explains the procedure for resetting the chucking table to zero without a wheel.
Guides on calibrating the distance and diameter caliper measurement devices.
Describes the calibration process for the optional automatic rim width measuring device.
Provides the physical dimensions of the machine in diagrammatic form.
Provides guidelines for proper disposal of electronic waste according to regulations.
General| Brand | rav |
|---|---|
| Model | G2.124R |
| Category | Wheel Balancers |
| Language | English |
