Ravelli Chronos - General safety warnings; Residual risks; Reasonably foreseeable incorrect use

Use and maintenance manual Chronos, Zeus, Ercole e Ermes
Page 53
Rev.1 12/12/2019
Chimney installation, system verification, operation
verification and initial calibration must be carried out
exclusively by qualied and authorised sta󰀨.
The chimney needs to be connected to a single chimney
that guarantees the draught declared by the Manufacturer
and observes the installation regulations that apply to
the installation site.
The room where the chimney is installed must have an
air intake.
Before using the chimney it is necessary to know the
position and function of the controls.
If the chimney catches re you must call the re brigade.
Only use original spare parts. Any tampering and/or
replacements that have not been authorised by Ravelli
can pose a danger to the user’s safety.
Residual risks
The chimney was designed so as to guarantee the user’s essential
safety requirements.
Safety was integrated into the chimney’s design and construction
as much as possible.
For every residual risk there is a description of the risk and the
zone or part that is applies to (unless the risk applies to the entire
chimney overall). Procedure-related information is also provided
on how to avoid the risk and on the correct use of the personal pro-
tective equipment required by and made compulsory by the Man-
ufacturer.
residual
risk
description procedure-related information
Risk of
burns
When the chimney is running, it may reach high
temperatures to the touch, especially on its external
surfaces. Take care to avoid burns and use the specic
tools if necessary.
Use the supplied glove to open the door for loading
operations and to adjust the primary air ow.
Reasonably foreseeable incorrect use
Reasonably foreseeable incorrect use is listed below:
• using the chimney as an incinerator;
• using the chimney with fuel other than rewood;
• using the chimney with liquid fuels;
• using the chimney with the door open and the ash drawer out.