Ravelli Chronos - Page 66

Use and maintenance manual Chronos, Zeus, Ercole e Ermes
Page 66
Rev.1 12/12/2019
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 1001\91001003.idw
91001003
Afmontage låge
28-03-12
BC
Scan 1001
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:
EMNE:
C:\Working Folder\Designs\Scan 1001\91001003.idw
91001003
Afmontage låge
28-03-12
BC
Scan 1001
VÆGT:
AREAL:
N/A
N/A
1
Combustion air box
Pointed screw
Screw
and
spring
To remove the door:
Loosen the pointed screw,
remove the screw and the
spring and lift o󰀨 the door
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 1001\91001007.idw
91001007
Afmontage røgstuds
17-04-12
BC
Scan 1001
VÆGT:
AREAL:
N/A
N/A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 1001\91001008.idw
91001008
Afmontage ovn fra svøb
17-04-2012
BC
Scan 1001
VÆGT:
AREAL:
N/A
N/A
2
3
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 1003\91003003.idw
91003003
Brændkammerforing, eksploderet
12-10-2018
KEN
Scan 1003
VÆGT:
AREAL:
N/A
N/A
Remove packaging
Dismount the connecting piece: Remove the ba󰀪e plate from the chimney before the connecting piece is removed. Loosen (not
dismount) the ange nuts holding the connecting piece inside the chimney. Push the connecting piece in the direction of the arrow
and remove it.
Lift the insert free from the grip holes in the front and pull it out of the cassette
Ba󰀪e plate
Remove packaging
Check that the built-in chimney is not damaged before installing it.
Scan 1003/1004 is delivered secured to the pallet. It is recommended that you remove the door and take all loose parts out of the
combustion chamber before unscrewing the chimney from the pallet; this will facilitate the mounting of the insert.
Dismount the combustion air box. This box is only needed, if the insert is to be connected with external air supply, see page 19.
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg
©
TG.NR:EMNE:
C:\Working Folder\Designs\Scan 1001\91001032.idw
91001032
Frisklufttilførsel bund af ovn
07-05-2012
BC
Scan 1001
VÆGT:
AREAL:
N/A
N/A
4 x self-tapping screws 4.2 x 6.5 mm