NEW FIELD + CREATE NEW LINE | CR7/CR12 | QUICK START GUIDE
PAGE 11/35 | User manual | 116-8000-017 | Rev. B2
Now press AB line, to create an A-B line.
Press A+ to enter an existing direction.
Press on Curve when you want to create a bend or
pendulum.
Press "A" when you want to set the A point.
Drive to the other side of the field, press "B"
when you want to set the B point.
After pressing “B”, press the green check
mark this will confirm your line.
Automatic steering can now be activated by
pressing the steer icon.
To Next Page
Loading...
Need help?
General
