HOW TO CHANGE BETWEEN DIFFERENT TRACTORS | CR7/CR12 | QUICK START GUIDE
PAGE 5/35 | User manual | 116-8000-017 | Rev. B2
1 HOW TO CHANGE BETWEEN DIFFERENT TRACTORS
If the tractor profile has to be changed.
Open the UT with the the UT widget.
Press the gear icon.
“Machine settings”.
Press the bar: change profile.
When you have selected the correct profile,
confirm the chosen profile by pressing the
checkmark. It is possible that the antenna
will be restarted. The UT can be closed by
pressing the green checkmark at the bottom
left.
To Next Page
Loading...
