OPERATIONS | CR7/CR12 | QUICK START GUIDE
PAGE 28/35 | User manual | 116-8000-017 | Rev. B2
Press tramline configuration to add and
configure the tramlines.
S1: Number of lines from field
boundary to first tramline.
W1: More or less space at the tramline,
on the left
W2: More or less space at the tramline,
on the right.
S2: Number of lines between tramlines.
When you have a working width of 3 meter
and the additional width for the tramlines is
set at 50cm on both sides (W1 and W2) the
tramline will be 4 meters wide.
When you start planting with a 3 meter
machine, a part remains unprocessed to the
left and right of the spray track.
Press the green check mark to confirm the
pattern.
To Next Page
Loading...
Need help?
General
