2
Home Screen
Touch anywhere it appears to return to the Home screen.
Touch the:
Start Job icon to begin a new job or resume an existing job.
Tools icon to access the Tools Menu. The Tools Menu contains the
settings and calibrations for the field computer and control system.
Shutdown icon to power down the field computer. The Shutdown icon only
appears when a job is not in progress. Be sure to shutdown the console
before switching the computer off.
End Job icon to close a job in progress. The End Job icon only appears if a
job is in progress and replaces the Shutdown icon on the Home screen.
Info icon in the upper, right corner of the display to view the current
software and firmware versions of the field computer. If the field computer
is connected to a CANbus system, additional system information is
available by selecting the on the ‘About Envizio Pro’ screen.
DGPS Status Indicator
The current source and status of DGPS reception is displayed in the upper, left
corner of the Home Screen.
The DGPS Status Indicator will display:
if the status of Differential GPS is ready.
if an error or cautionary condition has been encountered.
if DGPS is non-functional. Make sure the DGPS antenna cable connections
are secure and the antenna has a clear, 360° view of the sky.
Gl1de
®
or
e-Dif
RTK or
CORS
OmniSTAR
HP
OmniSTAR
XP/G2
SBAS
(WAAS/
EGNOS)
Standard
Satellite
GS
Slingshot
GS
To Next Page
Loading...
Need help?
General
