Raven Envizio Pro Series User Manual

5
Guidance Screen
The Guidance screen is the main screen viewed during product application.
1. The On-Screen Light Bar is displayed along the top of the Guidance screen.
Settings for the light bar may be found by selecting:
2. The Tank or Bin Indicator displays the calculated volume of product remaining
in the tank or bin. Touch this indicator to display the Tank or Bin Volume
Configuration screen.
3. The Area Covered displays a tally of the total area covered by active sections
(sections toggled on) within the current job. Touch the rate display in the upper,
right corner of the display to toggle the area covered display for each control
channel.
4. The GPS Status status indicator displays the status of GPS reception and the
currently selected correction source on the Guidance screen. See the See
DGPS Status Indicator on page 2 for more information.
5. Touch the Display Mode icon to toggle the day or night modes for the guidance
screen display.
6. This area displays the Speed or Course Over Ground (COG). Touch this area
to toggle the information displayed.
7. The Distance to Swath display shows the distance and direction to the
displayed Guidance path.
8. The SmarTrax Status is displayed if an optional automated steering system is
connected to the field computer. This indicator appears green if the system is
engaged or red if the system is disengaged. If a CAN SmarTrax node is
installed, the SmarTrax engage/disengage icons will be displayed in the lower,
right corner of the guidance display. Refer to the Installation and Operation
Manual for the automated steering system for additional assistance.
1
7
11
9
12
8
10
2
3
5
4
13 14
6
15 16 17 18
SmarTrax
Engage
Tools Menu
Computer
Menu
Display

Raven Envizio Pro Series Specifications

General

Brand	Raven
Model	Envizio Pro Series
Category	Control Unit
Language	English