Calibration: Calibration Wizard 11
CALIBRATION
FIGURE 4. Setup Application Type
12. Use the drop down list to select Dry Manure/Litter option.
13. Select the Next button in the lower, right corner of the page to proceed.
FIGURE 5. Setup Application Type - Product 1
14. No Auxiliary Drivers are currently used on the Dry Manure/Litter configurations.
15. Ensure all Drivers (Auxiliary Driver 1 - 6) are set to “None”.
16. Select the Next button in the lower, right corner of the page to proceed.
To Next Page
Loading...
