Chapter 6
50 SCS 4000/5000 Series™ Installation & Operation Manual
ZERO SPD 3
When Zero Speed Shutoff is enabled, an alarm will occur when speed drops below
0.7 MPH [km/H]. Product control will not be resumed until the master switch is cycled
(See Zero Speed Shutoff section on page 46).
AUTO NOBM or
MAN NOBM
n/a
“NOBM” indicates that no boom sections are turned ON for the given product. See
Boom Select section on page 39 if boom sections are turned ON.
Mode Display
Audible
Alarm (*)
Alarm Description
To Next Page
Loading...
