7
• Operating Temperatures: -22° to +158° [-30° to +70° C]
• Storage Temperatures: -40° to +185° [-40° to +85° C]
• Humidity: 90% relative humidity at +140° F [60° C]
• Shock: MIL-STD-810G
• Vibration: MIL-STD-810G
If conditions are expected to exceed these specifications, remove the Field
Hub from the vehicle and store in a dry, temperature controlled environment.
Installing the SIM Card
Note: The SIM card type must be MiniSIM(2FF).
1. Use a nut driver to remove the nut and washer from the Field Hub Wi-Fi
antenna fitting. Skip this step for non-Wi-Fi model.
2. Using a Phillips head screwdriver, remove the top cover of the Field Hub.
3. If applicable, remove the existing SIM card by pulling it straight out.
4. Break the new SIM card out of the card carrier.
To Next Page
Loading...
