Need help?Do you have a question about the Raven Phoenix 300 and is the answer not in the manual?
General description of the Phoenix 300 DGPS receiver and its applications.
Explanation of various correction signals used for GPS accuracy.
Description of RTK technology for high-precision GPS corrections.
Guidelines for installing the GPS receiver and antenna on a vehicle.
Instructions for connecting and supplying power to the receiver.
How the receiver functions after initial startup in normal conditions.
Description of the main status screen shown when the receiver is powered on.
How to access and view information about the receiver hardware.
Information on viewing GPS signal status and position details.
How to access settings for differential correction sources.
Selecting the type of differential correction signal to be used.
Settings for the OmniSTAR DGPS broadcast service.
Settings related to RTK correction services and parameters.
Steps for updating the receiver's firmware via USB.
Procedure for updating the core GPS engine software.
Information on obtaining and using authorization codes for features.
Steps to verify physical connections and setup for troubleshooting.
Procedures for testing the antenna and its cable for issues.
Technical details and performance characteristics of the receiver.
Details on defects covered under the standard limited warranty.
Details on defects covered under the extended warranty period.
To Next Page
General
