EasyManua.ls Logo

Raven Phoenix 300 - Receiver Specifications

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Manual No. 016-0171-548 Rev. C 49
Troubleshooting
Signal Reception
If the receiver is operating in SBAS mode, make sure the proper PRN is selected.
Note: WAAS status information is available on the FAA web site:
www.nstb.tc.faa.gov
If the receiver is in GS or OmniSTAR
®
modes, verify the frequency of the satellites.
Specifications
TABLE 2. Receiver Specifications
Position Accuracy
See Table 3 on page 50
Update Rate
10 Hz
Timing Accuracy
N/A
Max. Velocity
1000 Knots
Num. of Channels
120
Rel. Humidity
95% non-condens.
Min. Signal Strength
5 µV @ 1000 bps
Altitude
60,000 ft. [18288 m]
Dynamic Range
greater than 100 dB
Dimensions
8.3” L x 5.7” W x 2.1” H
[21.1 cm x 14.5 cm x 5.3 cm]
Adj. Channel Rej.
50 dB at 1 KHz
Weight
20 oz. [0.57 kg]
Cold Start
Typical - 6 min.
Max. -15 min.
Antenna
Weight
less than 1.3 pounds [0.59 kg]
Warm Start
40 seconds
Antenna
Diam.
7.5” [19 cm]
Reacquisition
1 second
Input Voltage
9V to 16V DC
Acceleration
2G
Power
Consump.
less than 34 W @ 12V DC
Connectors/Ports
2 RS-232 I/O
Current
400 mA @ 12V DC
1 USB Port
Operating Temp.
14° to +122° F [-10° to +50° C]

Table of Contents

Related product manuals