Chapter 4
36 Phoenix 300 Installation & Operation Manual
Service ID and Region
Press the key to view the current Service ID number and region setting.
The Service ID screen is used to select the correct OmniSTAR satellite for the region of operation.
Press the key and use the or arrow keys until the desired region is flashing on the screen.
Press the key to select the displayed setting.
The following service region ID numbers are available on the Phoenix 300 receiver:
TABLE 3. Region ID Numbers
ID # Description ID # Description
00 User Defined 07 East Africa
01 N. America East 08 Australia
02 N. America Central 09 Atlantic O. East
03 N. America West 10 Indian Ocean
04 South America 11 Pacific Ocean
05 Asia-Pacific 12 Atlantic O. West
06 Africa
To Next Page
Loading...
