3
Manual No. 016-0171-548 Rev. C 19
Display Menus
Carrier and Signal Status
Press the key to view the CNR and signal status screen.
CNR (Carrier to Noise Ratio) is the signal strength of the correction signal to noise. As this value increases,
noise level may cause interference, position accuracy or precision issues, or cause the system to lose
differential all together.
The CNR display also provides the status of OmniSTAR correction signal reception. This screen may display
Signal Locked or No Signal Lock when operating with OmniSTAR correction enabled.
Virtual Base Station Subscription Information
Press the key to display the VBS (Virtual Base Station) time remaining until expiration in weeks, days,
and seconds.
Press the key to display the OmniSTAR VBS subscription status.
Note: Contact OmniSTAR for more information or to extend services.
To Next Page
Loading...
