4
Manual No. 016-0171-548 Rev. C 41
Configuration Menus
Baud Rate
Press the key to display the Port B Baud Rate Setting.
Press the key and use the or arrow keys to select a different baud rate for the correction
messages sent to the Phoenix 300 receiver.
Output Configuration Menu
Access the Output Configuration menu to set the Port A or B baud rate settings or to manually configure the
NMEA (National Marine Electronics Association) output messages. See the National Marine Electronics
Association (NMEA) Messages section on page 44 for more information on NMEA messages.
Press the key until the Output Configuration screen is displayed.
To Next Page
Loading...
