Chapter 4
34 Phoenix 300 Installation & Operation Manual
GS - Slingshot Configuration Menu
Access the GS Configuration menu to set up communications with the Slingshot Field Hub. Contact a local
Slingshot dealer for assistance with activating Slingshot wireless services.
Note: The following settings will only be displayed in the GS Configuration menu if “GS - Slingshot” is
selected on the Correction Mode screen. Refer to the Correction Configuration Menu section on
page 27 for more information on selecting the correction source.
Press the key until the Slingshot GS Configuration screen is displayed.
Accuracy Warning
Press the key to display the accuracy warning screen.
The accuracy warning value sets the allowable horizontal accuracy (or standard deviation) for field operation.
Once the receiver determines the position solution meets the set value, the solution will be considered
converged and the appropriate status will be displayed on the Home screen.
Note: Higher values will allow the receiver to converge faster, but will allow more horizontal position
error. Smaller values will provide a more accurate position, but will take longer to converge and are
more likely to lose a converged status during field operations.
Press the key and use the or arrow keys to modify the accuracy warning value.
Press the key again to save the displayed setting.
To Next Page
Loading...
