4
Manual No. 016-0171-548 Rev. C 35
Configuration Menus
Baud Rate Settings
Press the key to display the Port B Baud Rate Setting.
Press the key and use the or arrow keys to select a different baud rate for the correction
messages sent to the Phoenix 300 receiver.
OmniSTAR
®
Configuration Menu
Access the OmniSTAR Configuration menu to configure the Phoenix 300 for OmniSTAR DGPS services.
Contact OmniSTAR to activate an OmniSTAR subscription.
Note: The OmniSTAR configuration menu may only be available if “OmniSTAR HP/XP” is selected on
the Correction Mode screen. Refer to the Correction Configuration Menu section on page 27 for
more information on selecting the correction source.
Press the key until the OmniSTAR Configuration screen is displayed.
To Next Page
Loading...
