Manual # 016-0130-030 Rev B
17
Resetting
Defaults
1. Press Function Key 4 (Reset Defaults) to reset the system.
2. The screen will show a warning. Press Function Key 1 to reset the
system defualts. After pressing “OK”, the system will sound the alarm
four times to indicated that the default settings have been reset. Once
the power is cycled the system will need to be calibrated. Go to the
“Calibrating the System” section to recalibrate the system.
Important: In some situations it may be necessary to reset
system defaults. Resetting the system defaults will erase all
calibration settings and require the system to be recalibrated.
To Next Page
Loading...
