Raven Unverferth NutriMax Series User Manual

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Unverferth NutriMax™ Applicator

ISO Steerable Hitch Installation &

Operation Manual

P/N 016-4001-133 Rev. B 07/17 E28236

Copyright 2017

Table of Contents

Questions and Answers:

S
Stephanie SimsAug 2, 2025
What to do if Raven Farm Equipment hitch does not respond to controls?
- S
  Sharon CrawfordAug 2, 2025
  If the Raven Farm Equipment hitch isn't responding, start by checking the cabling and ensuring 'Switchbox Present' is selected. Engage the hydraulics, making sure the SCV is engaged correctly to pressurize the valve. Unfold the booms, and remove any hitch locking mechanisms. Inspect the node high current lights and check the fuses for sufficient power. Toggle the master switch off and on. Finally, check the speed on the Diagnostics Screen and verify the speed source connections and functionality.
M
Michelle GarnerAug 18, 2025
Why Raven Farm Equipment system does not return to the center of the tow vehicle track when driving straight ahead?
- C
  Courtney HallAug 19, 2025
  If your Raven Farm Equipment system doesn't return to the center when driving straight, it might be due to a high sensitivity parameter. Try lowering the Sensitivity parameter. Also, the yaw sensor could be offset too far; stop the vehicle, check the YR value on the diagnostics screen, and re-zero on the Setup Screen if the value is greater than 1 or less than -1. Finally, the hitch center position might be offset, so re-center the hitch, lock the center locking mechanism, and reset the SPS center position on the Setup Screen.

Raven Unverferth NutriMax Series Specifications

General

Brand	Raven
Model	Unverferth NutriMax Series
Category	Farm Equipment
Language	English

Summary

Important Safety Information

Warning

Critical warnings regarding hydraulic pressure, personnel safety, and operational hazards during installation and operation.

Caution

Safety precautions for operating the system, ensuring clear areas around pivot points and booms.

Instructions for Hose Routing

Instructions for Wire Routing

Steerable Hitch Component Installation

Install the Hydraulic System

Detailed instructions for installing the hydraulic system, including valve and hose connections.

Install the Steerable Hitch Node

Install the Rotary Sensor

Install the Proximity Switch

Install the Steerable Hitch Wiring

ISO Calibration & Operation

Calibrating the Steerable Hitch System

Program the Machine Settings

Program Switch Box Status

Program the Left and Right Min Steer Settings

Program the Steering Position Sensor (SPS) Settings

Zero the Yaw Sensor and Accelerometer

Operating the Steerable Hitch System

Switchbox Installed

No Switchbox Installed

Safety Features

Troubleshooting

Node

System Alarms

System Issues

Related product manuals

Raven AutoBoom UltraGlide XT

Preview: Raven RS1

Preview: Raven Sidekick Pro

Raven Sidekick Pro

Preview: Raven VSN

Preview: Raven AccuFlow Vortex

Raven AccuFlow Vortex

Raven AIM Command FLEX

Raven Case IH AutoBoom XRT

AutoBoom Willmar Eagle 8500