EN/19 EN/20
Use as a FilehubChapter 3 Use as a FileHubChapter 3
3.2 Wireless Storage Anywhere
3.2.1 Function Introduction
Share files from the attached USB storage to
smartphones, tablets, or other devices that are
connected to the FileHub.
3.2.2 How to Use
1. Plug in your flash drive/hard drive or SD card.
(Follow 2.2 on Page 12).
2. Power on the FileHub (Follow 2.1.2 on Page 11).
3. Wait until the WiFi indicator or SD card
indicator stops flashing and stays on.
4. When the FileHub is on, connect your phone to
RP-WD009 WiFi (Follow 2.3 on Page 13).
5. After connecting to the RP-WD009 WiFi, run the
app “RAV FileHub” or access 10.10.10.254 on your
browser's address bar.
Note:
• For faster file transfer, it is recommended
to switch to 5GHz Mode.
• If another device is connected before,
please go to Settings > Logout first and
connect again.
To Next Page
Loading...
Need help?
General
