Raychem QuickStat-TC - User Manual

QuickStat-TC
Installation & Operation Manual
A
F
2
General Information
Use of this Manual
This manual covers the installation and operation of the Raychem
QuickStat-TC thermostat and must be used with the following document:
• QuickNet System Installation Manual (H57704)
Important: For the Tyco Thermal Controls warranty and agency
approvals to apply, the instructions included in this manual and product
packages must be followed.
Features
The QuickStat-TC is an electronic thermostat that must be used with the
Raychem QuickNet floor heating mats.
QuickStat-TC provides the following features:
• IntegratedClassA,Ground-FaultCircuitInterrupter(GFCI).
• Operatesat120V,208V,240V,60Hz.
• Switchesonyourheatingsystematpredeterminedtimesondifferent
days of the week.
• Offers4periodseachdaythatyoucansetatdifferenttemperatures.
• Comeswithapreprogrammedschedulethatissuitableformost
installations.However,youcancustomizethisprogramanytimeyou
wish.
• Allowsyoutoresetthethermostattofactorysettings.
• Changesthestarttimeofaheatingperiodautomaticallysothatthe
desired temperature is reached at the time that you set.
• Multipletemperaturecontroloptionssouserscancontrolthesystem
basedonfloortemperature(F),ambientairtemperature(A),orboth
(AF).
• On/Offswitchtoturnoffthermostatduringsummermonths.
Specifications
Approvals
Technical Data
Supplyvoltage 120V,208V,240V,60Hz
Maximumswitchingcurrent 15A
GFCI ClassA,5mAtriplevel
Ambientsetpointrange 40°Fto86°F(5°Cto30°C)
(A/AFmode)
Floorsetpointrange(Fmode) 40°Fto104°F(5°Cto40°C)
Floorlimitsetpointrange 40°Fto104°F(5°Cto40°C)
(AFmode)
Operatingtemperaturerange 32°Fto120°F(0°Cto50°C)
Storagetemperaturerange –4°Fto120°F(–20°Cto50°C)
A
C
B
E
D
Kit Contents
A 1 QuickStat-TCthermostat
B 2 Mountingscrews
C 1 Floortemperaturesensor15ft(4.6m)
D 5 Wire nuts
E 1 Screwdriver
400-115-052

Summary

Specifications

Approvals

Lists the safety certifications and standards met by the thermostat.

Technical Data

Details the electrical, voltage, current, and temperature range specifications.

General Information

Use of this Manual

Explains the purpose and required companion documents for installation.

Features

Outlines the key functionalities, including GFCI, multiple modes, and scheduling.

Kit Contents

Installation

Locating the floor temperature sensor

Guidance on positioning and installing the floor sensor for accurate readings.

Wiring the thermostat

Step-by-step instructions for connecting power, load, and sensor wires.

Thermostat Controls and Display

Controls and Display Overview

Identifies and explains the function of buttons, indicators, and screen elements.

Date and Time Setting

Setting the Clock and Date

Procedure for setting the current time and date on the thermostat.

Daylight Savings Time

Automatic DST Adjustment

Enabling the thermostat to automatically adjust for Daylight Savings Time.

Ground-Fault Protection

GFCI Testing and Resetting

Instructions for testing the GFCI and how to reset it if it trips.

Programming

Default Schedule

Details the pre-programmed daily schedule with wake-up, away, return, and sleep periods.

Modifying Schedule

Steps to customize the thermostat's heating program schedule for daily use.

Preset Temperatures

Temperature Settings

Defines Comfort, Economy, and Vacation temperature presets and their uses.

Operating Modes

Mode Descriptions

Explains Automatic, Manual, and Vacation modes for controlling the heating system.

Manual Override

How to temporarily adjust the setpoint while in Automatic mode.

Vacation Mode

Error Messages

Raychem QuickStat-TC Specifications

General

Voltage	120/240 VAC
Current Rating	15 A
Display	LCD
Mounting Type	Wall mount
Material	Plastic
Application	Floor Heating
Temperature Range	40°F to 104°F (5°C to 40°C)
Sensor	Floor Sensor
Contact Type	SPST
Type	Electronic Thermostat