Need help?Do you have a question about the Raycus RFL-C500 and is the answer not in the manual?
General| Brand | Raycus |
|---|---|
| Model | RFL-C500 |
| Category | Measuring Instruments |
| Language | English |
Explains warning and caution symbols used in the manual.
Classifies the laser as Class 4 and warns about radiation hazards.
Identifies the location of safety labels on the laser device.
Warns about dust on lens and protective cap usage.
Covers grounding and correct voltage usage for safety.
Outlines the requirements for the laser's cooling system.
Provides essential rules and precautions for installing the laser.
Details the DB25 control interface pins and their functions.
Describes the RS-232 serial port and its configuration parameters.
Guides on Ethernet connection and IP configuration for communication.
Outlines the correct sequence for powering on the laser.
Details laser parameters, modes, and emission control functions.
Explains how alarm information is displayed and updated in real-time.
Provides steps for operating the laser in stand-alone internal control mode.
Explains external control modes like modulation and gate mode.
Step-by-step procedure for safely shutting down the laser.
Describes how laser alarms are shown on the client software interface.
To Next Page
