Raycus RFL-C500 User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 2000W CW laser
Raycus User Guide | Product Description
6
9
Table 3: The Operation Environment Conditions for the Laser
Model
RFL-C2000S-CE/RFL-C2000H-CE
Power Source
220±10% V AC
50/60Hz
Power Capacity kW
6.0
Installation Environment
Flat and no vibration
Ambient Temperature ( )
10
~
40
Relative Humidity
＜70
Warning:
1) Make sure the product is properly grounded before use.
2) The laser output head is connected with fiber optic cable. Please inspect the
output head carefully for prevent dust or other pollution. Use appropriate
lens paper to clean it if necessary.
3) Failure to follow the instructions when operating the laser may cause
malfunction and damage.
4) It is not allowed to install the output head when the laser is in operation.
5) Do not look into the output head directly. Wear appropriate protective eye
glasses all the time when operating the laser
 Do not expose this product to high humidity (humidity> 95%).
 Do not allow this product to operate at a temperature below
the ambient dew point. (As shown in Table 4)

Raycus RFL-C500 Specifications

General

Brand	Raycus
Model	RFL-C500
Category	Measuring Instruments
Language	English