Raymarine AIS500 - Static Data Tab; GPS Status Tab; Diagnostics Tab; Software Update Tab

7
LD2342 V1.4 Page 7 of 22
SRT Marine Technology
User guide
SRT-MTB
©
proAIS Application
5. Once a connection is established the application is ready to use. Connection status is indicated at the bottom left of the
application window:
6. The functions of proAIS are arranged in a series of tabs. Each tab contains information relating to a particular aspect of
the connected AIS Transceiver. Depending on the version of proAIS installed not all tabs shown below may be visible.
•
Static data tab
o
Displays the 'Static data' for the connected AIS Transceiver. This includes the vessel's name, call
sign, MMSI number and other fixed information.
o
Allows editing of the static data.
•
GPS Status tab
o
Shows the status of the internal GPS receiver, including position fix data and satellite signal strength
graph.
•
Diagnostics tab
o
Shows the status of key system diagnostics. Used to troubleshoot installation of the Transceiver and
verify correct operation.
•
Other Vessels tab
o
Shows information about other vessels in the area received from the AIS Transceiver.
•
Safety messages tab
o
Displays safety related messages received from other AIS equipped vessels.
•
Commands tab
o
Provides access to software controlled features of the AIS500 Transceiver.
•
Serial Data tab
o
Shows the raw NMEA serial data being generated by the Transceiver.
o
Provides a facility to log this data to a file for later analysis.
o
Allows NMEA commands to be sent to the Transceiver.
•
Software update tab
o
Provides facilities to upgrade the Transceiver software from an update file.
Subsequent sections describe the functions of each tab in more detail.