Raymarine AIS500 - User Guide Overview; AIS Connection

6
LD2342 V1.4 Page 6 of 22
SRT Marine Technology
User guide
SRT-MTB
©
proAIS Application
User guide
AIS Connection
1. Launch the proAIS application by navigating to the 'proAIS' shortcut on the Start Menu.
2. The initial application screen will appear as shown below (exact screen display depends on version installed).
3. The application requires a serial connection to an AIS500 Transceiver. Connect the Transceiver to an available serial
port.
4. Select the serial port from the drop down menu, then click 'Connect':