Why can't I control the thermal camera from my Raymarine Marine Equipment?
If you cannot control the thermal camera from the Raymarine display or keyboard, ensure the thermal camera application is running on the multifunction display, as opposed to the video application which does not have camera controls.
How to fix weak Wi-Fi signal on Raymarine Marine Equipment?
If you are experiencing a weak or intermittent Wi-Fi signal with your Raymarine Marine Equipment, temporarily disable each wireless device in turn until you have identified the device causing the interference.
Why can't I switch between VIS/IR video on my Raymarine Marine Equipment?
If you cannot switch between thermal and visible (VIS/IR) video images on your Raymarine Marine Equipment, only 'dual payload' (dual lens) thermal cameras support VIS/IR switching. Ensure that the VIS/IR cable is connected from the camera to the Raymarine system.
Why is my Raymarine Marine Equipment showing the wrong speed?
If you're getting an incorrect speed reading (DST) on your Raymarine Marine Equipment, check that the paddle wheel is clean. Add a speed offset if no speed offset is currently set. Re-calibrate the equipment. If the transducer does not have a speed element, install a transducer with a speed element to enable speed readings.
How to fix weak Bluetooth signal on Raymarine Marine Equipment?
If you are experiencing a weak or intermittent Bluetooth signal with your Raymarine Marine Equipment, temporarily disable each wireless device in turn until you have identified the device causing the interference.
Why won't my Raymarine Marine Equipment connect wirelessly?
If you have no wireless connection on your Raymarine Marine Equipment, ensure that Wi-Fi is enabled on the multifunction display (Homescreen: > Set-Up > System Settings > Wireless Connections > Wi-Fi > On). Also, make sure that the 'Wi-Fi' option is enabled on the iPhone and that the Raymarine connection is selected as the Wi-Fi network. If a passcode has been specified for the multifunction display's Wi-Fi connection, ensure that the same passcode is entered into the iPhone when prompted.
Why won't my Raymarine Marine Equipment connect via Bluetooth?
If you have no wireless connection on your Raymarine Marine Equipment, ensure that Bluetooth is enabled on the multifunction display. Also, make sure that the 'Bluetooth' option is enabled on the iPhone and that the Bluetooth device is paired with the multifunction display.
How do I get the Raymarine app on my device for Marine Equipment?
If there is no Raymarine app on your device, it may not be installed and running. Download the required Raymarine app from the relevant application store and start the Raymarine app on your device.
Why is the Raymarine app running slowly on my Marine Equipment?
If your Raymarine app runs slowly or not at all, the device may not be compatible with the Raymarine app. For iOS devices, best performance is achieved on iPhone 4 or later and iPad 2 or later. For Android/Kindle Fire, best performance is achieved with a 1GHz processor or better running 2.2.2 or later. Also, ensure your MFD contains software version 3.15 or later, as the MFD software may be incompatible with the mobile application.
Why aren't my waypoints syncing with Navionics on Raymarine Marine Equipment?
If there is no waypoint/routes synchronization with the Navionics Marine app on your Raymarine Marine Equipment, the smartphone/tablet may not have the “Navionics Marine” app installed and running. Download the “Navionics Marine” app from the relevant app store and start the app on the device.
General| Brand | Raymarine |
|---|---|
| Model | c95 |
| Category | Marine GPS System |
| Language | English |
To Next Page
