Raymarine Ray 53 - Dual Watch operation; Tri Watch operation

WX
MON
WX
Dual Monitor Tri Monitor
Dual Watch operation
-. “MON” is displayed on the LCD.
-. Working CH number is displayed at Channel Display(Large) on the LCD.
-. Priority CH(16CH or 9CH) number is displayed at Channel Display(Small) on the
LCD.
. If the signal of Working CH is detected, the Channel Display(Small) will be
extinguished and the monitor will stop temporarily. Then the Receiver will be done for
7 seconds.( Even if there is no carrier for these 7 seconds, the monitor will stop for 7
seconds.) After 7 seconds is passed,the radio will monitor Priority CH.
-. If the carrier of Private CH is detected , the Priority CH number is displayed at the
Channel Display(Large) and the Channel Display(Small) will be extinguished and the
monitor will stop temporarily.
Tri Watch operation
-. “MON” is displayed on the LCD.
-. Working CH number is displayed at Channel Display(Large) on the LCD.
-. Priority CH(16CH or 9CH) number is displayed at Channel Display(Small) on the
LCD.
-. “WX” is displayed on the LCD
-. If the carrier of Working CH is detected, the Channel Display(Small) will be
NMEAVOL
SQL
NMEAVOL
SQL
M O N
NMEA
WX
VOL
SQL
M O N