1.2.2 LCD Display
The items of LCD display on the Front panel are described as follows
1) DSC display:
Will be displayed when DSC mode is entered.
2) WX display
: Will be displayed when Weather CH is entered.
Will be displayed when Tri monitor mode is entered.
3) INT display
: Will be displayed when International channels are programmed for
use. “INT” is not displayed when US or Canadian channels are
programmed for use.
4) CAN display
: Will be displayed when Canadian channels are programmed for use.
“CAN” is not displayed when US or International channels are
programmed for use.
5) MEM display
: Will be displayed when displayed CH is memory-registered.
Will blink at Scan Stand-by and be displayed at Memory Scan.
6) SCAN display
: Will be displayed at Scan mode
Will blink at Scan at Scan mode and be displayed with “MEM” at
Memory Scan.
7) ACK display
: Will be displayed at DSC mode when the response to individual calls
are received after DSC call is transmitted.
8) MON display
: Will be displayed at Monitor mode
(Dual monitor or Triple monitor)
9) TX display
: Will be displayed when transmitter power is detected at transmitter
mode.
To Next Page
Loading...
